Approved to the latest CEC Australian standard.
Two decades of experience in the end to end solar PV manufacturing process. ISO90001 and ISO14001 certified factory, to ensure excellent raw materials and production control.
Certified by TUV Rheinland (IEC61215, IEC 61730 standards) in extreme conditions (temperature, load, impact).
Guarantee from ±3% as power tolerance, customers can obtain 5.8% power more than conventional output.
100% EL test before and after lamination, and finished.
Electrical Characteristics
60pcs (6×10) — 5 bus bars
54pcs (6×12) — 5 bus bars
Voltage at Pmax (Vmp) [V]
Open-circuit voltage (Voc) [V]
Short-circuit current (Isc) [A]
Max-system voltage (VDC) [V]
(1000W/m²;1.5AM and 25°C cell temperature)
Temperature coefficient of pmax
Temperature coefficient of voc
Temperature coefficient of isc
Nominal module operating
temperature(NMOT)
Mechanical Characteristics
Cable type, diameter and length
PV-CO01, PV-CO02, PV-JK03M-1B,PV-JK03M-2B,PV-KST4/xy-UR(male)&PV-KBT4/xy-UR(female),
PV-KST4-EV02/XY(male)&PV-KBT4-EV02/XY(female)
Glass:Tempered glass 3.2mm / Encapsulation:EVA / Back side:White
Clear anodized aluminium alloy type 6063T5 frame
No. of Draining holes in frame
Qualification Test Parameters
Dielectric insulation voltage
3600Pa for positive (downward) and 1600Pa for negative (upward)
25mm(1inch) at 23m/s(52mph)
Current at Pmax (Imp) [A]